Home

Linux format USB terminal

How to Format USB Drives in Linux {3 Methods Explained

How To Format USB Drive in Linux Command Line - TecAdmi

  1. al and type the following commands to format it: First, let's figure out how to identify the media we wish to format. The name should start with /dev/sd and then a letter
  2. al. (CTRL + ALT + T) 3. Look for the USB drive you want to format, by running: $ df. The command above will display the directory path of your various drives. Take note of the drive you wish to format. In this tutorial, the name of the drive am going to format is Seth and its path under the filesystem is /dev/sdc1
  3. al or use the Disks utility to format your device
  4. al. Hope you can help me thanks! format. Share. Improve this question. Follow asked Aug 18 '15 at 13:08. warrior warrior. 211 1 1 gold badge 2 2 silver badges 5 5 bronze badges. 4
  5. al. Format a USB Disk as exFAT using Gnome Disks Tool
  6. Steps to format USB in Ubuntu and other Linux Plug-in the USB device. Wait for Ubuntu to automount the USB. Open file manager and right-click on the USB device
  7. The general syntax for formatting disk partitions in Linux is: mkfs [options] [-t type fs-options] device [size] Formatting Disk Partition with ext4 File System 1

Last Updated: June 3, 2021 Approved Ubuntu Linux includes several utilities that will allow you to format your USB drive. You can use the Disk Utility that comes packaged with Ubuntu, or you can use the Terminal. In either case, you can have your USB drive formatted in just a few minutes How to Format USB to exFAT in Linux. By. M. Zinoune. Share on Facebook. Tweet on Twitter. tweet; It doesn't matter whether you're a Linux user or a Systems Administrator and no matter how much we try to avoid Windows OS like the plague, somewhere in your tech travels you are going to run in to a Windows OS based system Formatting removable media like a USB disk or an SD card is a pretty simple task on Ubuntu Linux. No, I won't be using the terminal here although you can always use the command line on Linux. I'm going to show you how to format a USB on Ubuntu or other Linux distributions graphically. Format USB disks on Ubuntu & other Linux distribution Step 1 Create a partition of the disk. Firstly, connect the disk to your Linux system if you haven't already and launch the Terminal window on it. You can enter the following command to check it: sudo fdisk -l. Now, to create a partition, enter the command fdsk in the following format: sudo fdisk /dev/sdb Method 1: Format disk as exFAT using GNOME Disks tool. Formatting a drive using GNOME Disks is a straightforward job. It comes preinstalled in a number of Linux distributions. Plug in your external USB disk. Now, look for Disks in menu and open the GNOME Disks application

First we need to delete the old partitions that remain on the USB key. Open a terminal and type sudo su Type fdisk -l and note your USB drive letter. Type fdisk /dev/sdx (replacing x with your drive letter) Type d to proceed to delete a partition Type 1 to select the 1st partition and press enter Type d to proceed to delete another partition. You can format a USB drive through the graphical interface of your Ubuntu system as follows: 1. Open the file manager and then right-click the USB drive name that you want to format, from the left pane. 2 Thanks for watching. To keep up with my latest content, please subscribe to my YouTube channel at https://www.youtube.com/user/freedomreduxIn this video, I d.. USB or Removable Media Formatting in Linux CubicleNate Applications , Hardware , KDE Plasma , Linux , openSUSE , Terminal 2018-12-04 4 Minutes I am working on another project and whilst doing so, I was reintroduced to a kind of irritating problem with Desktop Linux

How to Format USB Drive in Linux 2 Working Solution

This article explains how to format a USB drive on Mac using the command-line. Even though using the Disk Utility tool to format your USB drive on Mac is a straightforward procedure, sometimes you might want to use the Terminal.Its use allows you to execute commands that provide the same result without having to rely on software applications Using Parted to Format SD Card, USB Drive, Flash Drive on Linux. Parted has two modes: command line and interactive. Parted should always be started with: $ sudo parted device. where: device is the SD Card, USB Drive or Flash Drive to edit. If you omit the device argument, parted will attempt to guess which device you want

Format a USB device to Fat32 - Mkfs. Another quick way to format a USB device to Fat32 is with the mkfs command in a terminal. To start the process, press Ctrl + Alt + T on the keyboard to open up a terminal. Or, search for terminal in the app menu and launch it that way. Once the terminal window is open, plug in the USB device Unmount your USB drive in Linux. The syntax to unmount the partition of our USB drive: sudo umount [MOUNT POINT] With /mnt/usbdrive as the mount point, you can unmount by running this command from the terminal: sudo umount /mnt/usbdrive. Note that Linux automatically unmounts the USB drive when booting down

*Free download USB drive data recovery software:* https://bit.ly/2UwYXedhow to format usb drive in linux ubuntuUbuntu tutorials for beignners playlist :-http.. Run the following command in Terminal to format the USB as per the VFAT file system: $ sudo mkfs.vfat /dev/sdb1. If you want to format the USB drive as ntfs or ext3, you can do so by simply replace the vfat in the above command with the required file system. Your USB drive will be successfully formatted based on the file system you specified

Terminal. If you're a terminal fan, you can quickly get Gparted installed on Ubuntu with the following command below in a terminal window. sudo apt install gparted Ubuntu: Format USB with Gparted. After installing the Gparted application on your Ubuntu PC, plug in the USB device you wish to format and launch the Gparted app Niedrige Preise, Riesen-Auswahl. Kostenlose Lieferung möglic

How to format usb in linux using terminal. Here is the step to format your usb drive using linux terminal. Step 1: Insert your usb drive. Wait till it mounts. Step 2: Login as super user by typing su command. Step 3: Use the following command to find the device name. check out the device boot name.. for example its /dev/sdb1 in my pc The following command will format using the NTFS Filesystem for use on Windows and some supported Linux distributions: sudo mkfs.ntfs /dev/sdb1. sudo mkfs.ntfs /dev/sdb1. sudo mkfs.ntfs /dev/sdb1. Looking to mount your newly formatted USB stick or drive? Here's how Luckily for you formatting a flash drive on Linux is pretty straight forward and will only take a few minutes. Before we get started though a word of warning: formatting a USB flash drive or external hard drive will wipe the data contained therein. So before you format anything, backup your important files

Find the name of the device in the Terminal; Format a bootable USB to normal. Wipe the filesystem from your flash drive; Create the new partition using the command line; Format the USB drive with FAT; Create the partition using a graphical tool; Testing the USB flash device. One more solution to format a bootable USB to norma Checking USB Capacity. Before testing the real capacity, make sure the data on the flash drive is backed up and then format it, which can be done with Gparted partition editor. Close Gparted when it's done. Now back in your terminal, use f3write command to let f3 write a file to your flash drive. f3write /media/flash-drive-mount-point Mounting and formatting USB drives on Linux isn't the easiest thing to do. This is especially true if you are on a console-only operating system, like Raspberry Pi OS Lite. Today, I'll show you how to format and mount a USB drive on your Raspberry Pi, whether in terminal or graphic mode. It's a 3-step process Mount pendrives with commands in the Linux terminal. Published: 24 Jan, 2019. Last modified: April 2, 2020. Overview. This is a small guide to detect a newly attached device to an USB port and mount it in Linux. We will explore different strategies that will help when some of the tools isn't available. in a tree-like format by default. We. I suggest that newbies connect a PL2303 to Ubuntu, chmod 777 /dev/ttyUSB0 (file-permissions) and connect to a CuteCom serial terminal. The CuteCom UI is simple \ intuitive. If the PL2303 is continuously broadcasting data, then Cutecom will display data in hex format

How to format and mount a USB drive in the Linux terminal

You can partition and format a USB memory stick or hard drive from a terminal window on the Raspberry Pi. This removes ALL information from your memory stick/hard drive, so make sure you want to do that before you continue. First, you need to identify which device is your USB stick - the easiest way is to remove it (if it is plugged in) and then reconnect it *Free download USB drive data recovery software:* https://bit.ly/2UwYXedhow to format usb drive in linux ubuntuUbuntu tutorials for beignners playlist :-http.. Step - 1: Convert the ISO File to IMG File. To create a live USB from the terminal, you will need to convert the ISO image of your chosen Linux distro to an IMG file. This can be done by using the hdiutil tool. Simply fire up a terminal session and issue the following command If you are looking for a simple and direct way to format a USB flash drive in Ubuntu or Debian (similar to the method available in Microsoft Windows), you can use the USB Stick Formatter utility.. USB Stick Formatter is Mint sticks Linux Mint provides this package by default since Linux Mint 16, and it can be easily installed in Ubuntu 18.04. It can be formatted as

How to Format USB Drive on Linux - Linux Hin

You can also use the dd command to do this from a terminal on any Linux distro. Whichever method you choose, you'll need the Linux distribution's ISO file. For example, Ubuntu Linux has two built-in methods for creating a bootable USB drive. A bootable USB drive provides the same experience to the user as an Ubuntu Live DVD Format New Partition. In our example, we created a partition table for Linux; now we are going to format this partition as Ext3. To format the newly created partition, issue the following command in the terminal prompt: sudo mkfs.ext3 /dev/sdb. Replace ext3 with ext2 or ext4 if you wish to format in these filesystems First make sure USB pen is not mounted. Click on Places > Computer > Select USB pen > Right click > Select Unmount Volume. Let us assume that /dev/sda1 is your partition name for USB pen. To format type the following command (Open X terminal and type the command) $ sudo mkfs.ext3 /dev/sda On most computer systems, Linux or otherwise, when you plug a USB thumb drive in, you're alerted that the drive exists. If the drive is already partitioned and formatted to your liking, you just need your computer to list the drive somewhere in your file manager window or on your desktop

Format USB Drive with Fdisk/MKFS from the Terminal. If fsck didn't manage to repair the device's filesystem, you can try to format it to use it as if it is new. 1. The first step is to erase any existing filesystem structures and recreate them from scratch. You can use fdisk for this. Run it with sudo on your device with Introduction. For all Linux users, work with usb drives, is really easy, and share data with Windows users through it, is also easy. At least before you need to format the usb drive for any reason, if you format it using Linux ext3 or any other Linux mode, you will not be able (at least not easily) to share data with Windows users One thing I would like to know is if Linux on Chromebook is any different from Linux anywhere else. If there are any suggestions or questions I am very willing to hear. I wish to download Ubuntu to my drive through terminal, but can not because my device is not mounted. I am sorry for the long read, but I hope this outlines my issue way more USB devices can reach up 5GB/s as of this writing where as PCI and serial devices have less speeds. Depending of USB firmware, it's categorize in to USB 1.0, USB 2.0, USB 3.0. USB have competitor in the from of Thunderbolt interface. As a Linux User/administrator we should know USB bus details as well as devices connected

Step-V (Start Formatting Pen drive / USB Drive using Linux Terminal) Syntax of command. # mkfs.FORMATEXTENSION -n 'NAMEOFDEVICE' -I DRIVELOCATION. where. mkfs : Make Linux file systems using format with different Linux extensions. -n : name of devices. -l : Fixed partition for Pen Drive / USB Drive. Format the Pen Drive / USB Drive using. The following are the two commands that I use throughout this guide to format the USB drives in FAT or NTFS format. mkfs.vfat. mkfs.ntfs. As the name implies, mkfs.vfat will format an USB drive in FAT, and mkfs.ntfs will format the USB drive in NTFS format. These two utilities comes preinstalled with most Linux distributions USB Keyboard. USB Mouse. External Hard drive. Partitioning a Drive on Linux via Command Line. 1. For most of this tutorial, we will be making use of a piece of software called parted. Parted is the CLI (Command-Line Interface) version of its GUI brother, gparted Q. How do I format USB pen in Linux? A. You can use standard mke2fs command to format usb pen in Linux. mke2fs is used to create an ext2/ext3 filesystem (usually in a disk partition or other USB devices). device is the special file corresponding to the device (e.g /dev/hdXX). blocks-count is the number of blocks on the device

sudo apt-get install gparted. To open GParted, enter the following command in the terminal: sudo gparted. Advertisement. Find your USB drive in the drop-down box at the top right of the GParted window. The drive should be unallocated - if it has a valid partition on it, then you may be looking at the wrong drive The following tutorial explains how to mount USB drive in Linux system using terminal and shell command line. If you are using desktop manager, you will most likely be able to use it to mount USB drive for you. Mounting USB drive is no different than mounting USB stick or even a regular SATA drive Here I will show you how to create a bootable USB flash from ISO file using the Linux terminal. Before we start make sure you have downloaded the .ISO file and have a USB flash drive with not less than 4GB capacity. Check USB Drive. Connect the USB flash drive to your machine and check if it's connected successfully This is what I did to format and mount a driver larger than 2TB on Linux, follow my step by step tutorial. Run fdisk -l to check out your disk device name, for example: fdisk -l. Output example: Disk /dev/sdd: 4000.8 GB, 4000787030016 bytes 255 heads, 63 sectors/track, 486401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector.

PCLinuxOS KDE 2020

While Linux offers built-in support for NTFS volumes through the ntfs-3 driver, you more than likely don't have support for exFAT as a file system. To remedy this, open up a terminal by pushing Ctrl+Alt+T. You might also want to search for the word terminal from the Ubuntu Dash Access the Terminal (each Linux distribution has a dedicated Terminal version, which can be easily found either as an icon in the taskbar on within the main programs displayed on the main menu). Identify the drive assigned to your USB key by entering the following command: $ lsbl

Format USB Drive in Linux - Command Line - ShellHack

  1. al commands in order, followed by explanations of what they do: Note: You'll need to be an ad
  2. This will unmount the USB disk from our system. Alternatively, we can use the device's name in this format. sudo umount /device/name In this particular case, we will use the command as given below to unmount the USB disk. sudo umount /dev/sdb1 Now that the device has been unmounted, we will make a bootable drive using it. 4
  3. Re: USB stick format. Try fdisk again, then tell it to create a new empty DOS partition table, then create a new primary partition and write the changes to disk. Unplug the pen drive and plug it again, check dmesg for any errors, if no errors try to fdisk -l again and if the partition is there create the filesystem, otherwise no idea why it.
  4. al: Note: Ter
  5. To format a USB flash drive using File Explorer on Windows 10, use these steps: Open File Explorer. Click on This PC from the left pane. Under the Devices and drives section, right-click the.
Autoblog de korben

Formatting SD or USB disk under Linux - LinuxConfig

  1. The installer is also applicable to USB sticks and other external media. Note: If you already have a Linux System booting, then you do not need to make a partition for Tiny Core! Tiny Core can run in a single directory in your existing Linux installation. To do so, at step 1, uncheck the option to Install boot loader
  2. al) 5 tools to create bootable usb from iso linux command line and gui. Table of Contents. Create bootable USB from ISO Linux Command Line or GUI. Method 1: Unetbootin. Method 2: balenaEtcher
  3. al to create a bootable USB for Linux Mint. Step 1: Insert the USB drive into your Mac and then open Ter

How to Format USB Drive in the Terminal Unixme

2. Start the Brasero software burner. 3. Click the Burn Image - Burn an existing CD/DVD image to disc button to open the Image Burning Setup window. 4. Click the button beneath the title Select a disc image to write to open up your file manager. Locate and double-click the downloaded ISO file to load it To format a USB drive, users generally prefer VFAT or NTFS file systems because they can be easily mounted on Windows operating systems and Linux systems. Format vs Fat FileSystem. To format USB with vFat File System, use the following command - $ sudo mkfs.vfat /dev/sdb1 Format NTFS FileSystem. To format a USB Flash Drive with NTFS file.

Keep These Portable Python Builds for Linux Always With

a) Format to FAT: sudo mkdosfs -n 'Label' -I /dev/sdd You can also use the -F 32 parameter to create a FAT32 partition. b) Format to EXT3: sudo mkfs.ext3 -n 'Label' -I /dev/sdd For both: Where Label is will be the name displayed for the USB media so you can set it to whatever you want; and sdd is your usb drive you had to remember at step 1 Creating the Bootable USB from Linux. Navigate to the latest releases section on github. Note which Ventoy-x.x.xx-tar.gz version is the most recent. 1. From your Linux desktop, open a terminal Ctrl+Alt+T. 2. Next, to download Ventoy, as a single line, replacing 1.0.29 with the latest version, typ

How to Format Your USB Drive as FAT32 in Linux - Linux Hin

All of these need to be done in the Terminal app. Windows 10 bootable USB vs Linux ISO USB. Windows 10 is a very specific bootable media, so the process is a bit involved. For generic Linux installation ISOs this procedure would be simpler. So the first two steps are the same, then Windows and Linux have separate procedure Step 2: Connect a USB drive that you would like to use to prepare the bootable Windows 10 USB to your PC running Linux. Step 3: Format the USB drive. To do that, open the Disks application (use search). Select your USB in the left-pane, click the hamburger icon, click the Format disk option, select Don't overwrite existing data (Quick) and.

In the left-hand pane, click on the USB drive to select it. Click the Partition tab. Select 1 Partition from the drop-down menu. Enter a name for the drive, in this example Ubuntu Mac. Change the Format to Mac OS Extended (Journaled) Click the Options button. Selecting the correct GUID Partition Table option Step 1. Plug-in your USB drive to your system running on Linux. Once connected, your system should detect the drive. Step 2. Navigate to the File Manager. In the File Manager, you should see your USB drive. Now, right-click on your drive, and click on the Format option from the menu that appears. Step 3

Si quieres formatear un pendrive o dispositivo USB en Linux, puedes hacerlo desde la terminal. Es un método universal que funciona en todas las distribuciones Step 1: Insert the USB drive and Linux system will detect the drive. Then, you should open the command line terminal window, type command fdisk -l , and note down the Device information of the USB drive (in this post, the USB drive is /dev/sdb1 ). Step 2: Determine the mount point on which the USB drive is mounted

Open a Terminal from the keyboard shortcut (CTRL+ALT+T) or from the system menu. To get initial information about the USB Root Hubs on the current system we will use the command: 'lsusb -s <bus>:<device>'. We will not specify a Bus, but we will specify a specific device with the command 'lsusb -s :1' in the Terminal B. Format USB trong Linux. Format USB trong Ubuntu bằng lệnh Terminal dễ dàng hơn nhiều so với trong hệ thống Windows. Nhưng một số người dùng Ubuntu không quen thuộc với các lệnh Terminal. Hướng dẫn này sẽ giúp người dùng Ubuntu (Linux) thực hiện các bước đơn giản để format USB Before you do anything else, try this. Put the USB drive in the freezer. Then get a bag of Doritos, (Cool Ranch works best). Smoke a bowl and eat the Doritos. Then check if the USB works. If it does, well, that's awesome. If it doesn't, well, it's still awesome! level 1. narf865 Connect the PC via an USB cable to the USB UART port of the Xilinx development board. Turn the board on. Open a terminal on you Ubuntu machine by pressing: [CTRL] + [ALT] + T. To find if the Silabs driver on the PC understood that a hardware device is connected, type: lsusb. The output text of this command in the terminal is something like this

USB_RTD_232/3 Wire RTD sensor to USB adapter | Dracal

how to format USB Flash Disk using Ubuntu terminal - Ask

Jul 6, 2014. #1. Resetting the USB Subsystem. The Universal Serial Bus (USB) is a major improvement for all computer systems to allow a universal connection type for numerous device types. The Bus system is a little more complicated than most can imagine. Sometimes, it is possible that the USB devices fail and require to be restarted $ sudo mount /dev/sdc /media/usb Read this: How To Format USB Drive in Linux Command Line; Copy OS Files - Now copy all files from mounted iso /media/iso/ to USB drive /media/usb. $ sudo cp -ra /media/iso/* /media/usb Make USB Bootable - Finally, we need to make this USB bootable. Copy ldlinux.sys file to USB drive to make it bootable Now, let's create a FAT32 filesystem on it so we can use the drive and copy files to it. sudo mkfs.vfat -F 32 -n MYDRIVE /dev/sdb1. Output is like: mkfs.fat 4.1 (2017-01-24) That's it, your drive should be already accessible from your file explorer and be ready to copy that pesky BIOS flash file to it! v1.1.26 Format the USB drive, download the Linux Mint ISO file, then burn the ISO to the USB Drive. Turn off Windows fast startup, restart your PC while holding down the Shift key, then select to boot from a device on the UEFI boot menu.; If you don't see the blue UEFI screen, reboot your PC and force it to boot from the USB drive during system startup Double-click Terminal. In the Terminal window, run mount. Take note of the USB drive's name. In the terminal window, type umount /dev/disk1s1, where disk1s1 is the USB drive's name. Disabling Write Caching in Linux. Press CTRL+ALT+T to launch the Terminal. Run sudo gedit /etc/hdparm.conf; Find write_cache and remove the # in front of it

Choosing the right Linux distribution for a task is critical, and having numerous distributions on one USB drive makes this easy. Here's how you can achieve this, with Multiboot USB Mounting a USB drive is easy these days on most Linux distros. But you may encounter some weird quirky distros that demand your terminal knowledge for mounting a USB drive successfully without it doing the work for you. For instance, if you've tried installing a Linux server or Slackware for..

How to Format a USB Drive as exFAT on Linu

5. Ext 2/3/4: The extended file system (Ext) was the first file system created specifically for Linux. If you plan to use the USB drive on Linux computers, you can format it to this file system. Compatibility: Linux, Xbox 360/One Pros: support for large file sizes and large drives Cons: cannot be read and written by Windows unless with third-party software, Ext 2 lacks journaling The installer is also applicable to USB sticks and other external media. Note: If you already have a Linux System booting, then you do not need to make a partition for Tiny Core! Tiny Core can run in a single directory in your existing Linux installation. To do so, at step 1, uncheck the option to Install boot loader But we still need a Linux kernel file (named bzImage above) to copy to this drive! Why not using your Buildroot-generated kernel? . See my other howto here. All the necessary files have been copied to our USB drive, we can unmount it now. # cd && umount /mnt/usb. Now you can plug your drive and boot your new system Create Bootable USB Drive Using dd Command On Linux. First format your pen drive. In order to format our pen drive we need to unmount the device from the operating system. Unmount is nothing but an removing device from directory tree. Which prevents device from data loss. umount /dev/sdb*. Note: sdb is my pen drive How to Format USB Flash Drive/Pen Drive Using CMD on Win 10. Step 1. Open Command Prompt on Windows 10. You have several ways to open Command Prompt on Windows 10. One easy way is: press Windows + R, type cmd in Run dialog, press Ctrl + Shift + Enter and click Yes to run Command Prompt as administrator. Step 2

Format USB Drive in Ubuntu, Linux Mint [Quick Tip

Step 4: Format Your Pen Drive in FAT32 Format. Connect your USB to the computer. Right click your pen drive in My Computer and click on Format. In File System, click FAT32 and click on Start. Then click on OK. Let the fromat complete In the PowerShell terminal, enter the following command: format /FS:FAT32 DRIVE_LETTER: Use the File Explorer to double check your drive letter. My drive letter was D, so I entered format /FS:FAT32 D:. Press Enter, make sure your USB drive is plugged in, and press the Enter key again to start the process The commands are typed into the Windows Subsystem for Linux Terminal. Create a mount location in WSL and mount the drive (assume the drive shows in Windows as F:): mkdir /mnt/f mount -t drvfs f: /mnt/f. One can then create and manipulate files from both Windows and WSL on the same external drive. For network storage, assume networked. Now, to mount a USB drive in Linux using a terminal, follow the step-by-step instructions given below. If you're using Ubuntu Linux and aren't familiar with the command line, skip the first.

OPERASI KOMPUTER DAN PERANGKAT LUNAK DALAM SISTEM

Sometimes devices connected to USB ports need to be re-set. It's not unusual GSM modems and WiFi dongles to freeze and the only way to bring them back to life is to remove and re-attach. OLinuXino USB ports has power switches and current limiters which can be controller by Linux drivers. After some experimenting w Once you formatted USB drive, now you can write the Chromium OS IMG file to USB drive. If you're using Linux, open the terminal, run the following command (where sdb1 is your USB stick and path to the IMG file you extracted): $ sudo dd if=ChromeOS.img of=/dev/sdb1 bs=4

Make the USB drive bootable for Slax Linux. Now, open the copied Slax folder available inside the USB drive and again open the Boot folder. Ther you will see two files bootinst.bat and bootinst.sh. If you are on Windows then simply double click on the bootinst.bat, whereas Linux user can right inside the folder and select open in terminal. I am looking for a means, driver, configuration or method to setup a terminal session between a terminal emulator i.e. Telnet or SSH on Windows 7, and a Linux deice that supports terminal sessions on its USB port. The Linux device is the Raspberry Pi computer. I am working with a bunch of kids and this would make the process much less cumbersome WoeUSB is an amazing tool that can help you create a Windows 10 bootable USB, swiftly. All you need to do is: 1 . Download WoeUSB Zip by clicking on this link. 2. After downloading, extract the. How to format USB drive in Command Prompt? When you fail to format USB drive in Windows Disk Management or File Explorer, you can format USB drive through Command Prompt. Also known as CMD, cmd or cmd.exe, the Command Prompt is a command-line interpreter application in most Windows operating systems